Building a computer Hands-on

This page will keep updated.

1. Unboxing!

  • My supervisor, kindly enough, put all the sets of components inside the case.

image

  • These are the components!
    • The case
    • Motherboard
    • CPU (intel i5 core)
    • SSD M.2 1000 GB
    • RAM
    • Graphic card
    • Power supply
    • +ifixit kitimage

2. Wear anti-static strap on and start!

  • Wear anti-static strap and connect the other side of it to the PC case. metal part. (This picture is only an example of how to wear and use.)

  • Put motherboard on the desk. Now you are ready to build a computer!

3. CPU and Cooler fan

  • put CPU into a motherboard. match the orientation.

  • and put fan on the CPU.

    • The heat compounds will be placed on the CPU to convey heats from CPU to Metal blades.
    • Metal is highly conductive, so metal blades are useful strategy to remove heat from the CPU.

image

  • Make sure to have enough space between fan and wire, or the fan will hit the wire and makes noise!

  • Connect the wire to the motherboard.

    image

4. Install SSD into motherboard

  • Remove M.2 shield to install SSD

  • Install binding post corresponding to the size of M.2 SSD

  • Put M.2 shield back and it’s done.

5. Put I/O shield to the case, and install motherboard

  • Don’t forget to putu I/O shield before you install your motherboard to the case, or you need to do it over.
  • Match the orientation by I/O shield and I/O panel on the motherboard.2

image

  • like this!

image

6. Connect fan, I/O cables to the motherboard

  • Connect CPU fan and PC cover fan to the motherboard.

  • Put cables behind the cover for space management and connect to the motherboard.

image

7. Install graphic card to the motherboard

  • Install the graphic care do PCI express slot.

image

8. Install power supply, and connect to the mother board

  • Cable management is a must!

  • Thankfully, we are NVME SSD. so few cables are used.

D O N E!!


© 2018. All rights reserved.

Powered by Hydejack v8.5.2